plasticexpert

Stair nosings take every step and are expensive to replace. This guide covers thickness from 2 mm to 12 mm, nosing detailing, safety and a stair trial plan.

Warehouse floors take their worst loads during racking and re-fit. This guide covers thickness from 2 mm to 12 mm, aisle planning, wheeled point loads and a warehouse trial plan.

Carpet in occupied buildings is crushed by routes, not by impacts. This guide covers thickness from 2 mm to 12 mm, route discipline, cleaning access and a carpet trial plan.

Laminate and LVT fail at click seams and thin wear layers. This guide covers thickness from 2 mm to 12 mm, expansion gaps, moisture checks and a floating-floor trial plan.

Terrazzo and heritage floors cannot be replaced, so protection must be reversible and moisture-safe. This guide covers thickness, facing, surveys and conservation approval.

Polished concrete cannot be spot-repaired, so abrasion and staining are costly. This guide covers thickness from 2 mm to 12 mm, spill control, board comparison and a slab trial plan.

Epoxy and resin floors are most at risk during cure and under point loads. This guide covers timing, thickness from 2 mm to 12 mm, condensation control and a resin trial plan.

Marble and stone fail through etching, edge chips and trapped moisture. This guide covers thickness from 2 mm to 12 mm, curing and liquid control, facing choice and a stone trial plan.

Tiled floors fail at the joint and the glaze, not in the tile centre. This guide covers thickness from 2 mm to 12 mm, seam and grit control, board comparison and a trial plan for fit-out teams.

Hardwood floors survive renovation when the protection board is specified for the real load. This guide covers thickness from 2 mm to 12 mm, felt facing, seam and grit control, reuse economics and what to put in a supplier enquiry.