{"id":6988,"date":"2026-10-28T06:57:35","date_gmt":"2026-10-28T06:57:35","guid":{"rendered":"https:\/\/www.mingplastics.com\/pp-honeycomb-protection-board-pharmaceutical-production.html"},"modified":"2026-10-28T06:57:35","modified_gmt":"2026-10-28T06:57:35","slug":"pp-honeycomb-protection-board-pharmaceutical-production","status":"publish","type":"post","link":"https:\/\/www.mingplastics.com\/fr\/pp-honeycomb-protection-board-pharmaceutical-production.html","title":{"rendered":"PP Honeycomb Protection Board in Pharmaceutical Production: Validated Floor Protection"},"content":{"rendered":"
\"PP<\/a><\/div>\n

Pharmaceutical production adds validation and documentation to every material decision: what enters a GMP area has to be approved, recorded and shown not to affect the product or the environment. This article looks at protecting floors in pharmaceutical facilities. The focus is approval, documentation and protecting validated surfaces.<\/p>\n

In GMP areas, documentation is part of the product<\/h2>\n

Materials entering a pharmaceutical production area must be approved, and their use recorded, because anything that could affect product quality or the environment has to be accounted for.<\/p>\n

A PP honeycomb protection board<\/a><\/a> is non-shedding, non-absorbing and cleanable, which is why it can be considered for GMP routes where timber and paper products cannot.<\/p>\n

Confirm the material with QA before it enters, and keep the approval with the work documentation.<\/p>\n

Thickness choices from 2 mm to 12 mm<\/h2>\n

Pharmaceutical facilities move equipment, vessels and palletised material, so the middle to upper part of the 2 mm to 12 mm range is typical for routes.<\/p>\n

For pedestrian routes a mid thickness is enough. Where process equipment is moved, thicker boards protect seamless floors and their coved junctions.<\/p>\n

\n\n\n\n\n\n\n\n\n
Board group<\/th>\nTypical thickness<\/th>\nWhere it earns its place<\/th>\nWatch-outs<\/th>\n<\/tr>\n<\/thead>\n
Light-duty panel<\/td>\n2-3 mm<\/td>\nPedestrian routes outside production suites<\/td>\nNo load spreading for equipment<\/td>\n<\/tr>\n
General GMP panel<\/td>\n4-6 mm<\/td>\nProduction routes with trolley traffic<\/td>\nQA approval required; protect coves<\/td>\n<\/tr>\n
Heavy-duty panel<\/td>\n8-10 mm<\/td>\nProcess equipment and vessel moves<\/td>\nCheck seamless floor and cove tolerance<\/td>\n<\/tr>\n
Maximum protection<\/td>\n12 mm<\/td>\nHeavy process installation<\/td>\nConfirm floor capacity<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Coved junctions, cleaning agents and change control<\/h2>\n

Seamless pharmaceutical floors are coved at the wall junction, and that detail is both hygienic and vulnerable. Protect the cove rather than butting panels into it.<\/p>\n

Confirm compatibility with the site’s cleaning and sanitisation agents, and clean panels to the same standard as the surrounding floor.<\/p>\n

Record what was used, where and when, because a change-control or QA review may ask for that history.<\/p>\n

How honeycomb board compares with ply, cardboard and matting<\/h2>\n

Cardboard and timber are generally unacceptable in GMP areas: they shed, absorb and cannot be cleaned or documented to standard.<\/p>\n

Plywood is heavy, absorbs cleaning agents and splinters at cut edges, which is a contamination risk.<\/p>\n

Matting has its place in specific zones but is not temporary floor protection. A PP honeycomb board is cleanable, non-shedding and documentable.<\/p>\n

A practical trial plan for pharmaceutical sites<\/h2>\n

Get QA approval first, then protect one route and keep a comparable route on the current method. Inspect on the area’s cleaning schedule.<\/p>\n

Run a cleaning test with the site’s sanitisation agent on a sample panel, then check for residue and degradation.<\/p>\n

Record the approval, areas protected and inspection results, because in a validated facility that record is part of compliance.<\/p>\n

What to include in a protection board enquiry<\/h2>\n

State the floor type, the cleaning and sanitisation agents, the equipment loads and the fire performance required. Ask for confirmation that the board is non-shedding and non-absorbing.<\/p>\n

Request documentation to support QA approval, and ask about custom sizes for standard production routes.<\/p>\n

For a quotation or sample panel, contact service@mingplastics.com<\/a> or WhatsApp +86 189 3887 1524<\/a>. Include the surface type, floor area, trades on site and expected duration so the recommended thickness, facing and fire performance can be confirmed before you order.<\/p>\n

Final takeaway<\/h3>\n

In pharmaceutical facilities, get QA approval and keep the documentation, protect coves and junctions, and confirm cleaning agent compatibility before specifying.<\/p>","protected":false},"excerpt":{"rendered":"

GMP areas need approved, documented floor protection. This guide covers thickness from 2 mm to 12 mm, coved junctions and a pharmaceutical trial plan.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-6988","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6988","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/comments?post=6988"}],"version-history":[{"count":0,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6988\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/media?parent=6988"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/categories?post=6988"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/tags?post=6988"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}