{"id":6961,"date":"2026-10-28T06:46:46","date_gmt":"2026-10-28T06:46:46","guid":{"rendered":"https:\/\/www.mingplastics.com\/pp-honeycomb-protection-board-library-archive-stacks.html"},"modified":"2026-10-28T06:46:46","modified_gmt":"2026-10-28T06:46:46","slug":"pp-honeycomb-protection-board-library-archive-stacks","status":"publish","type":"post","link":"https:\/\/www.mingplastics.com\/fr\/pp-honeycomb-protection-board-library-archive-stacks.html","title":{"rendered":"PP Honeycomb Protection Board in Libraries and Archives: Protecting Floors Around Collections"},"content":{"rendered":"
\"PP<\/a><\/div>\n

Libraries and archives combine heavy shelving loads with collections that cannot tolerate dust or moisture, and works usually happen around stock that stays in place. This article looks at protecting floors during library and archive works. The focus is dust control, shelving loads and protecting collection areas.<\/p>\n

Collections cannot tolerate dust or moisture<\/h2>\n

In an archive, dust and humidity are collection risks, so any material brought in must be non-shedding and must not hold moisture against surfaces near stock.<\/p>\n

A PP honeycomb protection board<\/a><\/a> is non-shedding and non-absorbing, which makes it viable in areas where paper, fabric and timber products would be rejected.<\/p>\n

Because the boards lie flat and can be edge-finished, they do not generate the dust traps that curling sheet materials create.<\/p>\n

Thickness choices from 2 mm to 12 mm<\/h2>\n

Library and archive floors carry shelving, book trolleys and occasionally mobile shelving systems, so the middle to upper part of the 2 mm to 12 mm range is typical.<\/p>\n

For pedestrian routes a mid thickness is enough. Where shelving and book trucks are moved, thicker boards protect the floor from concentrated wheel loads.<\/p>\n

\n\n\n\n\n\n\n\n\n
Board group<\/th>\nTypical thickness<\/th>\nWhere it earns its place<\/th>\nWatch-outs<\/th>\n<\/tr>\n<\/thead>\n
Light-duty panel<\/td>\n2-3 mm<\/td>\nPedestrian routes through reading areas<\/td>\nNot for shelving or book truck loads<\/td>\n<\/tr>\n
General stack panel<\/td>\n4-6 mm<\/td>\nStack aisles with book trucks and foot traffic<\/td>\nConservation approval required<\/td>\n<\/tr>\n
Heavy-duty panel<\/td>\n8-10 mm<\/td>\nShelving moves and mobile shelving installation<\/td>\nConfirm floor capacity for shelving loads<\/td>\n<\/tr>\n
Maximum protection<\/td>\n12 mm<\/td>\nHeavy shelving system installation<\/td>\nConfirm structural capacity before loading<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Shelving, book trucks and collection protection<\/h2>\n

Protect routes used to move stock and shelving, and keep protection clear of collection material at all times, including stacked panels.<\/p>\n

Confirm the fire performance required for the area, and whether the collection insurer or conservation team has material requirements.<\/p>\n

Keep humidity management running: do not cover ventilation paths or create sealed pockets against the floor.<\/p>\n

How honeycomb board compares with ply, cardboard and sheeting<\/h2>\n

Cardboard and paper products are generally unacceptable near collections because they shed and absorb moisture.<\/p>\n

Plywood sheds at cut edges, absorbs water and is heavy to move through narrow stack aisles.<\/p>\n

Plastic sheeting traps moisture and dust. A PP honeycomb board is non-shedding, non-absorbing and light enough for narrow aisles.<\/p>\n

A practical trial plan for archives<\/h2>\n

Get approval from the conservation or collections team first, then protect one route and keep a comparable route on the current method.<\/p>\n

Run a dust check: after a period of works, lift panels and inspect for debris and any effect on nearby collection areas.<\/p>\n

Record the approval and inspection results, because in an archive that record supports collections care.<\/p>\n

What to include in a protection board enquiry<\/h2>\n

State the floor type, the shelving and trolley loads, the conservation requirements and the fire performance needed. Ask for confirmation that the board is non-shedding and non-absorbing.<\/p>\n

Ask for documentation to support collections-area approval, and about custom sizes for stack aisle widths.<\/p>\n

For a quotation or sample panel, contact service@mingplastics.com<\/a> or WhatsApp +86 189 3887 1524<\/a>. Include the surface type, floor area, trades on site and expected duration so the recommended thickness, facing and fire performance can be confirmed before you order.<\/p>\n

Final takeaway<\/h3>\n

In libraries and archives, get collections approval first, use non-shedding non-absorbing protection, and keep ventilation and humidity management running.<\/p>","protected":false},"excerpt":{"rendered":"

Archive floors carry shelving loads beside sensitive collections. This guide covers thickness from 2 mm to 12 mm, dust control and a collections trial plan.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-6961","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6961","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/comments?post=6961"}],"version-history":[{"count":0,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6961\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/media?parent=6961"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/categories?post=6961"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/tags?post=6961"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}