{"id":6941,"date":"2026-10-28T06:38:13","date_gmt":"2026-10-28T06:38:13","guid":{"rendered":"https:\/\/www.mingplastics.com\/pp-honeycomb-protection-board-cleanroom-pharma-install.html"},"modified":"2026-10-28T06:38:13","modified_gmt":"2026-10-28T06:38:13","slug":"pp-honeycomb-protection-board-cleanroom-pharma-install","status":"publish","type":"post","link":"https:\/\/www.mingplastics.com\/fr\/pp-honeycomb-protection-board-cleanroom-pharma-install.html","title":{"rendered":"PP Honeycomb Protection Board for Cleanroom Installation: Low-Shedding Floor Protection"},"content":{"rendered":"
\"PP<\/a><\/div>\n

Cleanroom installation adds particle control to every decision: materials brought in must not shed, must be cleanable and must not compromise the room’s classification. This article looks at protecting cleanroom floors during installation and qualification. The focus is low-shedding materials, cleaning compatibility and protecting a controlled surface.<\/p>\n

Particle control governs the material choice<\/h2>\n

In a classified space, the first test for any temporary material is whether it sheds particles and whether it can be cleaned to the room’s standard. That eliminates paper, cardboard and most timber products immediately.<\/p>\n

A PP honeycomb protection board<\/a><\/a> is a non-shedding plastic panel that can be wiped with compatible agents, which is why it can be considered where other protection cannot.<\/p>\n

Confirm the material with the validation or QA team before it enters the room, because approval is part of the qualification record.<\/p>\n

Thickness choices from 2 mm to 12 mm<\/h2>\n

Cleanroom installation involves equipment moves and trolleys, so the middle to upper part of the 2 mm to 12 mm range is usual for routes.<\/p>\n

For pedestrian access during installation a mid thickness is enough. Where equipment and vessels are moved into the room, thicker boards spread the loads that would otherwise damage the floor covering and its sealed joints.<\/p>\n

\n\n\n\n\n\n\n\n\n
Board group<\/th>\nTypical thickness<\/th>\nWhere it earns its place<\/th>\nWatch-outs<\/th>\n<\/tr>\n<\/thead>\n
Light-duty panel<\/td>\n2-3 mm<\/td>\nPedestrian access during installation<\/td>\nNo load spreading for equipment<\/td>\n<\/tr>\n
General cleanroom panel<\/td>\n4-6 mm<\/td>\nInstallation routes with trolley traffic<\/td>\nQA approval required; finish seams<\/td>\n<\/tr>\n
Heavy-duty panel<\/td>\n8-10 mm<\/td>\nEquipment and vessel moves into the room<\/td>\nConfirm floor covering tolerance<\/td>\n<\/tr>\n
Maximum protection<\/td>\n12 mm<\/td>\nHeavy process equipment installation<\/td>\nConfirm slab capacity and classification impact<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Cleaning, seams and preserving classification<\/h2>\n

Finish seams and edges so they do not collect particles, and clean panels on the room’s schedule rather than treating them as an exception.<\/p>\n

Wipe panels before they enter the room and inspect them when lifted, because contamination introduced during works is expensive to remove later.<\/p>\n

Keep protection clear of returns, grilles and any airflow path, since covering them changes the room’s behaviour as well as its cleanliness.<\/p>\n

How honeycomb board compares with film, ply and matting<\/h2>\n

Cleanroom films are designed for this and are often the first choice for flat surfaces, but they are single-use and do not protect against point loads.<\/p>\n

Plywood sheds, absorbs cleaning agents and is generally excluded from classified areas. Matting is cleanable but heavy and usually permanent rather than temporary.<\/p>\n

A PP honeycomb board is non-shedding, cleanable and reusable, and it adds the load spreading that film cannot provide during equipment installation.<\/p>\n

A practical trial plan for cleanrooms<\/h2>\n

Get QA approval for the material first, then protect one route and keep a comparable route on the current method. Inspect on the room’s cleaning schedule.<\/p>\n

Run a cleaning test with the approved agent and check for residue and particle generation.<\/p>\n

Record the approval, the cleaning log and the condition at lift, because those records support requalification.<\/p>\n

What to include in a protection board enquiry<\/h2>\n

State the room classification, the floor covering, the cleaning agents, the equipment loads and the fire performance required. Ask for confirmation that the board is non-shedding and cleanable.<\/p>\n

Ask for documentation to support material approval, and about custom sizes to reduce cutting inside the room.<\/p>\n

For a quotation or sample panel, contact service@mingplastics.com<\/a> or WhatsApp +86 189 3887 1524<\/a>. Include the surface type, floor area, trades on site and expected duration so the recommended thickness, facing and fire performance can be confirmed before you order.<\/p>\n

Final takeaway<\/h3>\n

In a cleanroom, get material approval first, keep airflow paths clear, finish seams against particle traps and specify thickness for equipment loads.<\/p>","protected":false},"excerpt":{"rendered":"

Cleanroom protection must be non-shedding and cleanable. This guide covers thickness from 2 mm to 12 mm, QA approval, airflow and a cleanroom trial plan.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-6941","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6941","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/comments?post=6941"}],"version-history":[{"count":0,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6941\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/media?parent=6941"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/categories?post=6941"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/tags?post=6941"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}