{"id":6927,"date":"2026-10-28T06:32:19","date_gmt":"2026-10-28T06:32:19","guid":{"rendered":"https:\/\/www.mingplastics.com\/pp-honeycomb-protection-board-data-center-raised-floor.html"},"modified":"2026-10-28T06:32:19","modified_gmt":"2026-10-28T06:32:19","slug":"pp-honeycomb-protection-board-data-center-raised-floor","status":"publish","type":"post","link":"https:\/\/www.mingplastics.com\/fr\/pp-honeycomb-protection-board-data-center-raised-floor.html","title":{"rendered":"PP Honeycomb Protection Board for Data Centre Work: Protect Raised Floor Tiles"},"content":{"rendered":"
\"PP<\/a><\/div>\n

Raised access floors are structural, expensive and intolerant of misuse: a cracked tile or a damaged pedestal affects the floor’s load rating and the room’s airflow. Work inside a data centre happens around live equipment, so protection has to be clean, non-shedding and quick to place. This article looks at protecting raised floors during installation and maintenance. The focus is load spreading, airflow and clean handling.<\/p>\n

A damaged tile is a load-rating problem<\/h2>\n

Raised floor tiles are rated for distributed and point loads, and a cracked or delaminated tile no longer meets that rating. Replacement also means lifting surrounding tiles and disrupting cable management underneath.<\/p>\n

The practical risk is concentrated load: equipment on castors, a pallet truck wheel or a set-down point. A rigid PP honeycomb protection board<\/a><\/a> spreads those loads across several tiles instead of letting one tile take them.<\/p>\n

Because the panels do not shed fibres or absorb water, they suit a room where contamination and humidity are controlled.<\/p>\n

Thickness choices from 2 mm to 12 mm<\/h2>\n

Raised floor work usually needs the middle to upper part of the 2 mm to 12 mm range, because wheeled equipment loads are high relative to the tile rating.<\/p>\n

For pedestrian access routes a mid thickness is sufficient. Where racks, UPS units or battery strings are moved, thicker boards spread the load enough to keep individual tiles within their rating.<\/p>\n

\n\n\n\n\n\n\n\n\n
Board group<\/th>\nTypical thickness<\/th>\nWhere it earns its place<\/th>\nWatch-outs<\/th>\n<\/tr>\n<\/thead>\n
Light-duty panel<\/td>\n2-3 mm<\/td>\nPedestrian routes across raised floor tiles<\/td>\nInsufficient for castor and wheel loads<\/td>\n<\/tr>\n
General access panel<\/td>\n4-6 mm<\/td>\nMaintenance routes with light equipment<\/td>\nKeep perforated tiles clear<\/td>\n<\/tr>\n
Heavy-duty panel<\/td>\n8-10 mm<\/td>\nRack and UPS moves across the floor<\/td>\nConfirm tile point-load rating first<\/td>\n<\/tr>\n
Maximum protection<\/td>\n12 mm<\/td>\nBattery strings and heavy plant installation<\/td>\nMore than routine maintenance needs<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Airflow, earthing and clean handling<\/h2>\n

Do not cover perforated tiles or grilles that are part of the room’s airflow design. Plan the protected route around them rather than over them.<\/p>\n

Check whether the protection affects anti-static provisions in the room, and confirm the approach with the facilities team before laying panels across a live floor.<\/p>\n

Wipe panels before they enter the room and inspect them for debris when lifted, because contamination under a raised floor is difficult to remove later.<\/p>\n

How honeycomb board compares with film, cardboard and ply<\/h2>\n

Films and cardboard are generally not acceptable in a data hall: they shed, absorb moisture and do nothing for point loads on a tile.<\/p>\n

Plywood spreads load well but is heavy to carry into a data hall, absorbs moisture and can splinter, which is a contamination risk.<\/p>\n

A PP honeycomb board is light, clean, non-shedding and non-absorbing, and it spreads load across tiles. Those properties are why it suits work around live equipment.<\/p>\n

A practical trial plan for data halls<\/h2>\n

Protect one cold aisle route and keep a comparable route on the current method. Inspect tiles at each lift and photograph tile edges and corners from fixed positions.<\/p>\n

Run a point-load test with the rack or equipment castor that will be used, then lift and inspect the tiles beneath.<\/p>\n

Record whether perforated tiles were kept clear and whether panels stayed clean, because both affect the room’s operation.<\/p>\n

What to include in a protection board enquiry<\/h2>\n

State the tile rating, the floor type, the equipment loads and the airflow constraints. Ask for the recommended thickness, facing and panel size, plus fire performance for the room.<\/p>\n

Ask for guidance on keeping perforated tiles clear and on clean handling, and about custom sizes to suit the tile grid.<\/p>\n

For a quotation or sample panel, contact service@mingplastics.com<\/a> or WhatsApp +86 189 3887 1524<\/a>. Include the surface type, floor area, trades on site and expected duration so the recommended thickness, facing and fire performance can be confirmed before you order.<\/p>\n

Final takeaway<\/h3>\n

On raised floors, spread point loads across tiles, keep perforated tiles clear and handle panels cleanly. Confirm the tile rating and the anti-static approach before specifying.<\/p>","protected":false},"excerpt":{"rendered":"

Raised floor tiles lose their load rating when cracked. This guide covers thickness from 2 mm to 12 mm, airflow, clean handling and a data hall trial plan.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-6927","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6927","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/comments?post=6927"}],"version-history":[{"count":0,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/posts\/6927\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/media?parent=6927"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/categories?post=6927"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mingplastics.com\/fr\/wp-json\/wp\/v2\/tags?post=6927"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}